There are many people who have carpets in their homes, but not everyone knows how to clean carpet properly. In the following article, you will learn how to clean carpet effectively using the steps provided.
Learning how to clean carpet correctly to keep it fresh and clean
It's common for people to believe vacuuming once a week keeps carpets clean, but that's not the case. The dirt and grime can easily become embedded deep within the fibers, making it near impossible to remove with a vacuum. Here are the basic steps on how to clean carpet the right way. All of this can be done at home with a little help, of course.
Materials needed
It depends on your household how often you should deep clean your carpet. If you have pets or kids, you should do it every two weeks. Otherwise, every month is fine.
You'll need the following items to do a deep clean:
It's more cost-effective to get a wet and dry vacuum with a wash system. Additionally, a powerful vacuum will save you tons of time and make the cleaning process more efficient.
1. Prepare the space
2. Vacuuming
Vacuum the entire floor area thoroughly to get rid of as much debris as possible. Pay special attention to the areas covered by furniture. If possible, use a powerhead vacuum cleaner.
3. Set up the machine
Different manufacturers design their shampooers differently. Prepare yourself by reading the carpet cleaner's manual and familiarizing yourself with the controls and procedure. As per the manufacturer's instructions, fill the machine with water and select the shampooer.
4. Test on the spot
If you want to make sure your settings are correct and the cleaning solution won't stain or change the color of your carpet, perform a spot test in an inconspicuous area (such as a spot normally covered by furniture). In the case of discoloration, you may need to check the machine or use an alternative cleaning solution.
5. Start cleaning
The best way to clean carpets is with a carpet cleaner
Vacuum the carpet wet and dry
Once you're satisfied with the spot test, start shampooing the entire carpet area. To avoid stepping on a wet carpet, start cleaning as far away from the entry as possible. Be careful not to miss any areas when moving the cleaner. It may be necessary to redo the floor if it still looks dirty after a couple of hours.
6. Redo with water
Run the machine over the carpet again with a tank of clear water after you've finished shampooing. By doing so, you will neutralize the detergent and remove any excess shampoo from the carpet.
7. Air the room
After cleaning, let the room air dry or use an air purifier to remove any humidity.
You can either let the room dry naturally or you can use an air purifier. During the drying process, keep the room as aerated as possible by opening windows and doors. This will prevent mildew and mold from growing.
8. Vacuum again
Once your carpets have dried, vacuum the area again to remove any loose debris.
The best way to keep your carpets fresh and clean is to do a deep clean every few months with a good quality detergent. You can also use your shampooer after a spill or if you notice an area that looks particularly dirty. Your carpets will always look their best with a bit of time and care.
Consider hiring a professional cleaning company like Ocean Clean if you do not have the tools needed or are too busy to learn how to clean carpet at home. Ocean Cleans can assist you in doing the hard work and finding an eco-friendly cleaning solution for your needs.
For further information, please contact us at +65 6334 3309.
See more: